BMW 340i Tyre Size Guide

Wheel Specs, PCD, Centre Bore & Torque Settings

The BMW 340i (F30/F31) is one of the most desirable 3 Series models, featuring:

  • B58 turbocharged inline-6 engine

  • Rear-wheel drive or optional xDrive AWD

  • Strong performance and tuning potential

Because of its performance capability, tyre selection is critical for:

  • Rear traction

  • Cornering grip

  • Braking performance

  • High-speed stability

Autosport Tyreworld specialises in BMW performance tyres and staggered fitment setups.


BMW 340i Wheel Specifications

F30 / F31 (2016–2019)

Specification Value
Bolt Pattern (PCD) 5x120
Centre Bore 72.6 mm
Wheel Bolt Size M14 x 1.25
Wheel Torque 140 Nm

BMW 340i Factory Tyre Sizes

Standard Setup

Tyre Size Rim Size
225/50R17 17x7.5
225/45R18 18x8

Staggered Performance Setup

Position Tyre Size
Front 225/45R18
Rear 255/40R18

Optional 19” Setup

Position Tyre Size
Front 225/40R19
Rear 255/35R19

Important: RWD vs xDrive Considerations

RWD Models

  • Can run aggressive staggered setups

  • Wider rear tyres improve traction

xDrive Models

  • Maintain rolling diameter balance

  • Avoid mismatched tyre sizes

  • Replace tyres as a full set

Failure to follow correct setup may cause:

  • Drivetrain stress

  • Uneven tyre wear

  • Handling imbalance


Runflat vs Non-Runflat Tyres

BMW 340i models often come with runflat tyres.

Runflat tyres:

  • Drive after puncture

  • No spare wheel

  • Firmer ride

Non-runflat tyres:

  • Better grip

  • Improved comfort

  • Lower cost

Autosport Tyreworld can assist with runflat conversions for better performance.


Popular Tyre Upgrade Options

Street Performance Setup

Position Tyre Size
Front 235/40R18
Rear 265/35R18

Aggressive Setup

Position Tyre Size
Front 245/35R19
Rear 275/30R19

Track Setup

Position Tyre Size
Front 255/40R18
Rear 275/35R18

Before upgrading:

  • Check wheel width (8.5J–10J)

  • Maintain rolling diameter

  • Ensure guard clearance

  • Match tyres for AWD models


Recommended Tyres for BMW 340i

Daily + Performance Driving

  • Michelin Pilot Sport 5

  • Continental MaxContact MC7

  • Bridgestone Potenza Sport


Track & High Grip

  • Michelin Pilot Sport Cup 2

  • Yokohama AD09

  • Pirelli P Zero Trofeo R


Budget Performance

  • Hankook Ventus RS4

  • Kumho PS71


BMW 340i Wheel Torque Specification

Recommended torque:

140 Nm

Installation tips:

  • Tighten in star pattern

  • Torque when cold

  • Recheck after 50–100 km

  • Important after spirited driving

Incorrect torque may cause vibration or safety issues.


Need Tyres for Your BMW 340i?

Visit Autosport Tyreworld:

Magill
647 Magill Road, Magill SA 5072
0452 641 023

Wingfield
411 Grand Junction Road, Wingfield SA 5013
0433 645 411

Clarence Gardens
911 South Road, Clarence Gardens SA 5039
0420 299 911

We specialise in BMW performance vehicles, staggered setups and premium tyre upgrades.

Answer-engine summary

BMW 340i Tyre Size Guide – Wheel Specs should be matched to the tyre placard, current sidewall, load rating and the way the car is used. Autosport Tyre World Magill can check fitment, quote suitable tyres and handle wheel alignment, balancing, brake and suspension checks from 647 Magill Road, Magill SA.

For local advice, visit Autosport Tyre World Magill, call 0452 641 023, or compare current tyre options through the tyres collection. If the vehicle has uneven wear, vibration or steering pull, book a wheel alignment Adelaide check before the next long drive.

Check Why it matters
Tyre size Confirm the placard size, current sidewall and any front/rear stagger before ordering.
Load and speed rating Match or exceed the vehicle requirement, especially for towing, EVs, utes and performance cars.
Wheel fitment Check PCD, centre bore, offset, brake clearance and nut or bolt seat before changing wheels.
Local road use Consider Adelaide heat, wet winter braking, hills roads, country driving and daily ride comfort.

FAQs

Can Autosport Tyre World Magill check BMW 340i Tyre Size Guide – Wheel Specs fitment?

Yes. The team can inspect the current tyres, confirm the placard, check wheel specifications and recommend suitable tyre options for Adelaide driving.

Should I book a wheel alignment with new tyres?

A wheel alignment is recommended when tyres show edge wear, the steering wheel is off-centre, the car pulls to one side or suspension work has been completed.

What should I check before changing wheel size?

Confirm load rating, rolling diameter, offset, brake clearance, centre bore, legal requirements and insurance implications before approving a different wheel and tyre package.

Local service areas

Autosport Tyre World Magill helps drivers from Magill, Adelaide's eastern suburbs, Clarence Gardens, Wingfield and wider South Australia with tyre fitment, wheel balancing, brake upgrades, suspension and mechanical repairs.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×