BYD ATTO 2 DM-i Tyre Size: Quick Answer
BYD Australia lists 215/65R16 98V, 215/60R17 96H for current Australian-market BYD ATTO 2 DM-i variants or wheel packages. Confirm the tyre placard on the individual vehicle because the correct size can vary by variant, wheel package and model year.
- 215/65R16 98V
- 215/60R17 96H
Source: BYD Australia — BYD ATTO 2 DM-i specifications, accessed 3 October 2026.
Australian BYD ATTO 2 DM-i Factory Tyre Sizes
| Vehicle | BYD Australia listed tyre size |
|---|---|
| BYD ATTO 2 DM-i | 215/65R16 98V |
| BYD ATTO 2 DM-i | 215/60R17 96H |
The tyre size is only part of the specification. Confirm the load index, speed rating and whether the wheels are factory or aftermarket before ordering.
How to Check the Correct Replacement
- Read the tyre placard on the vehicle.
- Compare it with the current tyre sidewall.
- Record the full size, load index and speed rating.
- Confirm the wheel diameter, width and whether the setup is staggered.
- Check intended load, towing and driving use.
Can You Change the Wheel or Tyre Size?
A change may be possible, but overall diameter, wheel width and offset, brake and suspension clearance, load and speed ratings, steering clearance and applicable South Australian requirements need to be checked. Do not assume that a setup used on another vehicle is suitable for yours.
Suggested Tyres for the BYD ATTO 2 DM-i
These options provide a practical starting shortlist in each listed factory size. Continental is included as the primary option, with one Michelin or Dunlop alternative and one value-focused option from Winrun, Opals or Simmons.
| Tyre size | Continental option | Michelin or Dunlop option | Value option |
|---|---|---|---|
| 215/65R16 | 215/65R16 98H Continental UltraContact UX7 | 215/65R16 102V XL Michelin Primacy 5 (Pre Order ETA 1 to 2 Days) | Winrun 215/65R16 98H R380 |
| 215/60R17 | 215/60R17 96H Continental TechContact TC6 SUV | 215/60R17 100V XL Michelin Primacy 5 (Pre Order ETA 1 to 2 Days) | Winrun, Opals or Simmons 215/60R17 options — confirm exact product |
Fitment and availability note: These are starting points, not confirmation of fitment or current stock. Before ordering, confirm the individual vehicle's tyre placard, exact size, load index, speed rating, wheel package and current product availability. Equivalent products may be recommended where a listed model is unavailable.
Adelaide Replacement-Tyre Checklist
For daily Adelaide use, consider wet braking, comfort, road noise and tyre wear. Vehicles used for country travel, towing or unsealed roads may need a different balance. Correct fitting, balancing, pressure setup and wheel alignment remain important.
BYD ATTO 2 DM-i Tyre Size FAQs
What tyre size does the BYD ATTO 2 DM-i use in Australia?
BYD Australia's current page lists 215/65R16 98V, 215/60R17 96H. Confirm the individual vehicle tyre placard.
Can different variants use different sizes?
Yes. Variant, wheel package and model year can change the correct specification.
Is matching the size enough?
No. The replacement also needs the correct load and speed ratings and must suit the wheel and vehicle.
BYD ATTO 2 DM-i Tyre Fitment in Adelaide
Autosport Tyre World can check the placard, current tyres, wheel specification and intended use before recommending a replacement.
- Magill: 647 Magill Road, Magill SA 5072 — 0452 641 023
- Clarence Gardens: 911 South Road, Clarence Gardens SA 5039 — 0420 299 911
- Wingfield: 411 Grand Junction Road, Wingfield SA 5013 — 0433 645 411
Contact Autosport Tyre World with the vehicle year, variant and tyre placard details for a fitment check.