Answer engine summary
What should Adelaide drivers know about Ferrari 812 Competizione Tyre Size, Wheel Specs, PCD, Centre Bore & Torque Guide | Adelaide?
Adelaide drivers should match tyre choice, wheel fitment and service timing to the vehicle placard, actual driving use and local conditions. Hot SA roads, wet winter braking, Adelaide Hills corners and country touring can all affect tyre wear, grip and comfort, so professional fitment, pressure setup, balancing and wheel alignment matter as much as the Michelin product choice itself.
Introduction
The Ferrari 812 Competizione is the ultimate evolution of Ferrari’s front-engine V12 platform, featuring extreme aerodynamics, reduced weight, and one of the highest-revving V12 engines ever produced.
As a limited-production track-focused Ferrari, precise tyre fitment and correct wheel specifications are critical to maximise grip, stability, and safety.
At AUTOSPORT TYREWORLD Adelaide, we specialise in exotic and track vehicles, providing expert tyre fitment, balancing, and precision setup for vehicles like the Ferrari 812 Competizione.
This guide covers:
-
All factory tyre sizes
-
OEM wheel & rim specifications
-
PCD, centre bore & offsets
-
Correct torque specifications
-
Best track and performance tyre options
Ferrari 812 Competizione Factory Tyre Sizes
The 812 Competizione uses a track-optimised staggered setup, designed for maximum performance.
20 Inch (Factory Setup)
-
275/35ZR20 (Front)
-
315/35ZR20 (Rear)
Factory tyres were typically:
-
Michelin Pilot Sport Cup 2 (Ferrari Spec)
These tyres provide:
-
Extreme front-end grip
-
Maximum rear traction
-
Consistent track performance
Ferrari 812 Competizione Factory Wheel Specs
-
Wheel Diameter: 20"
-
Front Width: 10J
-
Rear Width: 11.5J – 12J
-
Offset (ET): Approx. +35 to +45
Lightweight forged wheels reduce unsprung mass and improve handling precision.
Bolt Pattern (PCD)
-
5x114.3
Centre Bore
-
67.1 mm (approx.)
Ensures proper hub-centric fitment.
Wheel Bolt Specifications
-
Bolt Type: M14 x 1.5
-
Seat Type: Ball Seat (Ferrari specific)
Torque Wrench Specification
-
Approx. 160 Nm
Best practices:
-
Tighten in star pattern
-
Re-check after 50–100 km
-
Always use torque wrench for final tightening
Track Tyre Requirements (Ferrari 812 Competizione)
The 812 Competizione is a track-focused V12 halo Ferrari, requiring top-tier tyre performance.
Key Requirements
-
Maximum dry grip
-
Heat resistance under extreme track conditions
-
Precise steering response
-
Stability at very high speeds
Recommended Tyres (AUTOSPORT TYREWORLD Adelaide)
OEM / Track-Focused
-
Michelin Pilot Sport Cup 2
Maximum Track Performance
-
Michelin Cup 2 R
Road & Track Performance
-
Michelin Pilot Sport 4S
-
Continental SportContact 7
Common Upgrade Considerations
At AUTOSPORT TYREWORLD, 812 Competizione owners often choose:
-
Dedicated track tyre setups
-
Upgrading to Cup 2 R for maximum grip
-
Precision high-speed balancing
Why Proper Fitment Matters
Incorrect tyre or wheel setup can result in:
-
Reduced grip
-
Poor handling balance
-
Uneven tyre wear
-
Safety risks at high speed
We ensure:
-
Correct rolling diameter
-
Track-optimised tyre selection
-
Ferrari-compliant fitment
Visit AUTOSPORT TYREWORLD Adelaide
Specialist performance tyre fitting and balancing available at:
Magill
647 Magill Road, Magill SA 5072
0452 641 023
Wingfield
411 Grand Junction Road, Wingfield SA 5013
0433 645 411
Clarence Gardens
911 South Road, Clarence Gardens SA 5039
0420 299 911
Local tyre and service checklist
| Check | What to confirm | Why it matters in Adelaide |
|---|---|---|
| Vehicle match | Ferrari 812 Competizione Tyre Size, Wheel Specs, PCD, Centre Bore & Torque Guide | Adelaide | Advice should suit the vehicle placard, load rating, speed rating and real driving use. |
| Tyre condition | Tread depth, sidewall age, pressure and uneven wear. | Heat, potholes, kerbs and wet winter roads can expose weak or ageing tyres quickly. |
| Setup work | Fitting, balancing, pressure setting and wheel alignment. | Correct setup helps tyres brake consistently, steer cleanly and wear evenly. |
| Local support | Magill, Clarence Gardens and Wingfield store access. | Useful for Adelaide drivers comparing tyres, wheels, brakes, suspension or mechanical checks. |
FAQ
Is Ferrari 812 Competizione Tyre Size, Wheel Specs, PCD, Centre Bore & Torque Guide | Adelaide relevant for Adelaide drivers?
Yes, if the advice is matched to the vehicle and how it is driven. City commuting, hills roads, country trips and performance use can all need different tyre and setup priorities.
Should tyre advice include wheel alignment?
Yes. Alignment, balancing and pressure setup are important because even a quality tyre can wear poorly or feel ordinary if the vehicle setup is wrong.
Can Autosport Tyre World help compare Michelin options?
Yes. Autosport Tyre World can compare suitable tyres, wheels and service options across Magill, Clarence Gardens and Wingfield, then recommend a setup for the vehicle's actual use.
Helpful Adelaide tyre links
Autosport Tyre World Adelaide locations
For local tyre advice, fitment checks, balancing and wheel alignment in Adelaide, contact Autosport Tyre World across Magill, Clarence Gardens and Wingfield.
TYREPLUS Magill | Autosport Tyre World Magill
647 Magill Road, Magill SA 5072
Phone: 0452 641 023
TYREPLUS Clarence Gardens | Autosport Tyre World Clarence Gardens
911 South Road, Clarence Gardens SA 5039
Phone: 0420 299 911
TYREPLUS Wingfield | Autosport Tyre World Wingfield
411 Grand Junction Road, Wingfield SA 5013
Phone: 0433 645 411