Holden Commodore SS Generations Overview
VN–VP SS (1989–1993)
-
Tyre Sizes:
-
205/65R15
-
215/60R15
-
-
Rim Sizes:
-
15x6J
-
15x7J
-
-
PCD: 5x120
-
Offset: ET43 to ET48
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 100–110 Nm
VR–VS SS (1993–1997)
-
Tyre Sizes:
-
215/45R17
-
-
Rim Sizes:
-
17x7J
-
-
PCD: 5x120
-
Offset: ET48
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 110 Nm
VT–VX–VY SS (1997–2004)
-
Tyre Sizes:
-
235/45R17
-
245/40R18
-
-
Rim Sizes:
-
17x8J
-
18x8J
-
-
PCD: 5x120
-
Offset: ET48
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 110–120 Nm
VZ SS (2004–2006)
-
Tyre Sizes:
-
245/40R18
-
-
Rim Sizes:
-
18x8J
-
-
PCD: 5x120
-
Offset: ET48
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 120 Nm
VE SS (2006–2013)
-
Tyre Sizes:
-
245/45R18
-
245/40R19
-
-
Rim Sizes:
-
18x8J
-
19x8J
-
-
PCD: 5x120
-
Offset: ET35 to ET48
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 140 Nm
VF SS (2013–2017)
-
Tyre Sizes:
-
245/40R19
-
245/35R20 (Redline variants)
-
-
Rim Sizes:
-
19x8J
-
20x8.5J
-
-
PCD: 5x120
-
Offset: ET35 to ET45
-
Centre Bore: 66.9 mm
-
Wheel Nut Torque: 160 Nm
Key Technical Summary
-
PCD: 5x120
-
Centre Bore (CB): 66.9 mm
-
Offset Range: ET35 → ET48
-
Wheel Nut Torque: 100 Nm → 160 Nm
-
Setup Type:
-
Mostly square setup (same tyre front/rear)
-
Some variants allow staggered upgrades
-
Common Upgrade Tyre Sizes (Australia)
Popular performance upgrades:
-
255/35R19 (improved grip and stance)
-
265/35R19 & 275/30R19 (staggered performance setup)
-
275/35R20 (aggressive street build)
Always confirm clearance and rolling diameter compliance.
Recommended Tyres for Holden Commodore SS
At Autosport Tyre World, we commonly recommend:
-
Daily Performance
https://autostw.com.au/search?type=product&q=Continental+MaxContact+7 -
Ultra High Performance
https://autostw.com.au/search?type=product&q=Michelin+Pilot+Sport+5 -
Track / Enthusiast
https://autostw.com.au/search?type=product&q=Yokohama+Advan+AD09
Why Correct Fitment Matters
Correct tyre and wheel fitment ensures:
-
Maximum traction for rear-wheel-drive V8 performance
-
Balanced handling and braking
-
Proper hub fitment via correct centre bore
-
Even tyre wear and optimal driving performance
Incorrect fitment can lead to reduced grip, vibration, and compromised safety.
Visit Autosport Tyre World
Professional fitting, balancing, and expert advice available at:
Magill
647 Magill Road, Magill SA 5072
0452 641 023
Wingfield
411 Grand Junction Road, Wingfield SA 5013
0433 645 411
Clarence Gardens
911 South Road, Clarence Gardens SA 5039
0420 299 911
Answer-engine summary
Holden Commodore SS Tyre Size should be matched to the tyre placard, current sidewall, load rating and the way the car is used. Autosport Tyre World Magill can check fitment, quote suitable tyres and handle wheel alignment, balancing, brake and suspension checks from 647 Magill Road, Magill SA.
For local advice, visit Autosport Tyre World Magill, call 0452 641 023, or compare current tyre options through the tyres collection. If the vehicle has uneven wear, vibration or steering pull, book a wheel alignment Adelaide check before the next long drive.
| Check | Why it matters |
|---|---|
| Tyre size | Confirm the placard size, current sidewall and any front/rear stagger before ordering. |
| Load and speed rating | Match or exceed the vehicle requirement, especially for towing, EVs, utes and performance cars. |
| Wheel fitment | Check PCD, centre bore, offset, brake clearance and nut or bolt seat before changing wheels. |
| Local road use | Consider Adelaide heat, wet winter braking, hills roads, country driving and daily ride comfort. |
FAQs
Can Autosport Tyre World Magill check Holden Commodore SS Tyre Size fitment?
Yes. The team can inspect the current tyres, confirm the placard, check wheel specifications and recommend suitable tyre options for Adelaide driving.
Should I book a wheel alignment with new tyres?
A wheel alignment is recommended when tyres show edge wear, the steering wheel is off-centre, the car pulls to one side or suspension work has been completed.
What should I check before changing wheel size?
Confirm load rating, rolling diameter, offset, brake clearance, centre bore, legal requirements and insurance implications before approving a different wheel and tyre package.
Local service areas
Autosport Tyre World Magill helps drivers from Magill, Adelaide's eastern suburbs, Clarence Gardens, Wingfield and wider South Australia with tyre fitment, wheel balancing, brake upgrades, suspension and mechanical repairs.
Ownership check for Holden Commodore SS Tyre Size, Wheel, Centre Bore & Torque Guide
Holden Commodore SS Tyre Size, Wheel, Centre Bore & Torque Guide should be matched to the way the vehicle is actually used around Adelaide, not just the tyre name or a generic online recommendation. Before fitting, Autosport Tyre World Magill checks the placard size, load rating, speed rating, wheel condition and current wear pattern so the final choice suits daily commuting, wet winter braking, hot summer roads and weekend touring.
That check is especially useful for 4WDs and utes because suspension changes, towing weight, canopy loads and mixed bitumen/gravel use can all change the best pressure, alignment and rotation plan. A practical fitment conversation helps avoid tyres that look right online but do not suit the vehicle, the load or the driver's expectations.
- Confirm the placard size and legal load rating before ordering.
- Inspect tread depth, sidewalls, tyre age and uneven shoulder wear.
- Book balancing or wheel alignment if vibration, steering pull or edge wear appears.
For local help, visit Autosport Tyre World Magill at 647 Magill Road, Magill SA 5072 or call 0452 641 023. The team can inspect the current tyres, quote suitable options and recommend wheel alignment, balancing, brake or suspension checks where needed.