Nankang CR-S Porsche 911 Fitment in Adelaide
This Porsche 911 was presented at Autosport Tyre World Magill for a staggered Nankang CR-S fitment: 235/40R18 at the front and 295/30R18 at the rear. The combination illustrates why a performance-tyre job is more than matching two numbers on a sidewall. Wheel width, clearance, load and speed ratings, vehicle setup and intended use all need to agree.
The fitment at a glance
- Vehicle: Porsche 911 performance application shown in our Magill workshop
- Front tyre: Nankang CR-S 235/40R18
- Rear tyre: Nankang CR-S 295/30R18
- Layout: staggered, with wider rear tyres
- Intended discussion: performance and track-focused use, not a universal recommendation for every 911
The Nankang CR-S is a 200-treadwear performance tyre. Nankang's published range lists the 235/40R18 as a 95Y XL size and the 295/30R18 as a 98Y XL size. Those published specifications are useful reference points, but they do not replace checking the exact tyre sidewall, wheel, vehicle placard and current vehicle configuration.
Why staggered sizing is used
A staggered setup uses different tyre widths at the front and rear. On a rear-engined, rear-wheel-drive performance car, the broader rear footprint can support the demands placed on the driven axle, while the front size affects steering response and clearance.
That does not mean “wider is always better”. The tyre must suit the wheel width and sit correctly without contacting the body, suspension or brake components. Changes can also affect balance, steering feel and the ability to rotate tyres front to rear.
What a workshop should check
Before fitting a track-focused tyre, our process is guided by the actual car rather than an online size list alone:
1. Confirm the current wheel diameter, width and offset.
2. Check the requested sizes against the vehicle, wheel and intended use.
3. Inspect available clearance around the suspension and bodywork.
4. Verify load and speed ratings on the supplied tyres.
5. Inspect valves, wheel condition and existing wear patterns.
6. Balance each assembly and discuss alignment where the old tyres show uneven wear.
Modified suspension, non-standard wheels and track alignment can materially change the answer. A size fitted to one Porsche 911 should not be assumed to fit every generation or build.
Is the Nankang CR-S an everyday road tyre?
The CR-S is aimed at drivers prioritising performance response and track capability. Its trade-offs can include faster wear, more road noise and different cold or wet behaviour than a road-biased touring tyre. Adelaide drivers should also consider heat, sudden rain and how far the car travels to and from events.
For a frequently driven street car, the best choice may differ from a car used mainly for club events or track days. Intended use should be part of the tyre conversation from the start.
Frequently asked questions
Will 235/40R18 and 295/30R18 fit every Porsche 911?
No. Fitment depends on generation, wheel dimensions, offset, suspension, body clearance and vehicle modifications. The pictured workshop example is evidence of one installation, not a blanket fitment claim.
Should an alignment be checked after fitting performance tyres?
It is sensible to inspect the old wear pattern and check alignment when symptoms or the vehicle setup justify it. Track-oriented geometry can also wear tyres differently from a road setup.
Where can I arrange a performance tyre inspection in Adelaide?
Autosport Tyre World Magill is at 647 Magill Road, Magill SA 5072. Call 0452 641 023 to discuss your vehicle, wheel specifications and intended use before booking.
Sources and limits
Size specifications referenced from the Nankang CR-S published product range. Vehicle-specific suitability must be confirmed on the car. This article does not claim independent lap testing or a guaranteed performance outcome.