Four-Wheel Alignment After Michelin Cup 2 Tyres on an R35 GT-R

Four-Wheel Alignment After Michelin Cup 2 Tyres on an R35 GT-R

Four-Wheel Alignment After Michelin Cup 2 Tyres on an R35 GT-R

Quick answer

This Nissan R35 GT-R received Michelin Pilot Sport Cup 2 tyres in 255/40R20 front and 285/35R20 rear sizes, fitted to difficult reverse-mount wheels after removing the original Bridgestone run-flats, followed by balancing and four-wheel alignment.

Alignment completes the tyre job

After fitting and balancing, we measured the vehicle on the alignment system. Toe and camber influence steering response and how load is distributed across the tread. Alignment also gives the owner a documented baseline for monitoring a performance-focused tyre. Any worn or damaged suspension component must be addressed before meaningful settings can be achieved.

Our protection-first process

  1. Inspect the wheel, tyre, valve and existing condition before work.
  2. Confirm reverse-mount orientation and plan the bead-removal direction.
  3. Apply three extra clear-film layers and three extra yellow-film layers around the vulnerable rim area.
  4. Break the stiff run-flat beads in controlled stages rather than forcing the assembly.
  5. Monitor the film, tool position and bead movement throughout removal.
  6. Inspect and clean the bead seats before fitting the Michelin Cup 2.
  7. Use controlled lubrication and mounting technique, checking that the bead is not trapped or overstressed.
  8. Inflate, seat, inspect, balance and verify the completed assembly.
  9. Fit the wheels correctly and finish with four-wheel alignment.

Workshop specification

Vehicle Nissan R35 GT-R
Removed tyres Original Bridgestone run-flat tyres
New tyres Michelin Pilot Sport Cup 2
Front size 255/40R20
Rear size 285/35R20
Wheel type Reverse mount
Extra rim protection Three clear-film layers plus three yellow-film layers
Final service Balancing and four-wheel alignment

Michelin Cup 2 ownership notes

Pilot Sport Cup 2 is a performance-focused tyre, not a universal replacement for every GT-R or every use case. Cold pressure, operating temperature, tread depth, weather, alignment and intended use all matter. Confirm the vehicle placard, full tyre specification and current manufacturer guidance before ordering.

Product and service links

FAQ

Why are reverse-mount wheels harder to fit?

The tyre must be worked from the rear mounting side, so orientation and tool path differ from a conventional wheel. This leaves less margin for rushed technique.

Why use six extra protective layers?

The three clear and three yellow layers create a sacrificial barrier and make coverage easy to inspect throughout the job. They reduce risk but do not replace correct machine setup and technician control.

Can alignment cure vibration?

No. Vibration can involve balance, wheel or tyre condition and other mechanical factors. Alignment addresses wheel angles and steering geometry.

Where was this work completed?

Autosport Tyre World Magill at 647 Magill Road, Magill SA 5072.

R35 GT-R Tyre Fitting and Wheel Alignment in Magill

Autosport Tyre World Magill
647 Magill Road, Magill SA 5072
Phone: 0452 641 023