Toyota HiLux Tyre Size Guide Australia: 2015–2026

Toyota Hilux 2015-2026 Tyre Size Guide for Adelaide Drivers

Toyota HiLux Tyre Size Guide Australia: 2015–2026

Quick answer

Do not apply one tyre size to every 2015–2026 Australian HiLux. The 2015–2025 generation and the new generation sold from December 2025 are different. For the earlier generation, key Australian references include 225/70R17C for some Hi-Rider/4x4 Single-Cab WorkMate and SR vehicles, 265/65R17 for some 4x4 Extra-Cab and Double-Cab WorkMate/SR vehicles, and 265/60R18 for selected higher-grade 18-inch packages. For the new generation, Toyota's current public information confirms the grade/cab range and 18-inch packages on upper grades but does not expose one complete tyre-sidewall specification for every variant. Always read the individual placard.

Australian HiLux generation and tyre-size guide

Generation / configuration Tyre or wheel reference Evidence boundary
2015–2025 Hi-Rider or 4x4 Single-Cab WorkMate/SR 225/70R17C on specified 17-inch steel-wheel configurations Toyota Australia historical model-update information; confirm year, body and placard
2015–2025 4x4 Extra-Cab/Double-Cab WorkMate or SR 265/65R17 on specified 17-inch steel-wheel configurations Toyota Australia historical model-update information; option packages can differ
2015–2025 selected SR5/Rogue/high-grade packages 265/60R18 common 18-inch reference Not universal; confirm exact grade, production date and placard
New generation, Australia from December 2025 WorkMate, SR, SR5, Rogue and Rugged X; upper-grade 18-inch wheel packages confirmed Do not transfer old-generation sidewall sizes; use the new vehicle's placard

Sources: Toyota Australia HiLux specification table, September 2026, current HiLux range, 2026 HiLux press kit and Toyota Australia historical HiLux update. Cab-Chassis/Pick-Up, Single/Extra/Double Cab, 4x2/4x4 and grade all matter.

Verified modified HiLux fitment

Workshop vehicle Front Rear Classification
Custom Toyota HiLux TE37ULTRA workshop fitment RAYS TE37ULTRA 20x10 +30, 5x114.3; Michelin Pilot Sport 4S 285/35R20 RAYS TE37ULTRA 20x12 +20, 5x114.3; Michelin Pilot Sport 4S 345/30R20 Documented one-off modified staggered package; not an OEM or general HiLux recommendation

This performance build is evidence that the package was fitted to that specific vehicle only. Before copying any part of it, identify the exact vehicle conversion and hub pattern, confirm wheel load rating, brake and suspension clearance, guard clearance, rolling circumference, front/rear behaviour, load and speed ratings, alignment, insurance and South Australian legality. It must never be presented as a normal 4WD HiLux tyre upgrade.

Documented replacement / larger-tyre workshop case

Vehicle Tyre fitted Evidence note
HiLux SR5 Dual Cab at Magill Sailun Terramax AT2 265/65R18 plus four-wheel alignment Real workshop fitment; the case does not state year, original placard size or wheel offset, so it is not labelled a universal approved modified size

Specific tyre recommendations for placard-confirmed 265/65R17 vehicles

Use Pattern and complete catalogue size Fitment note
Premium road/touring Michelin LTX Trail 265/65R17 112T Road-focused comfort candidate where rating matches
Balanced touring A/T Yokohama GEOLANDAR G015 265/65R17 112H Sealed-road and light gravel use
Mixed-use A/T Toyo Open Country A/T III 265/65R17 112H Touring and non-paved use candidate
Higher-load LT A/T Yokohama GEOLANDAR A/T4 G018 265/65R17 120/117S Compare LT ride, pressure and load requirements

Specific tyre recommendations for placard-confirmed 265/60R18 vehicles

Use Pattern and complete catalogue size Fitment note
Premium all-terrain Continental TerrainContact A/T 265/60R18 110T Confirm the individual placard load requirement
Balanced touring A/T Yokohama GEOLANDAR G015 265/60R18 110H Road/touring candidate
Mixed-use A/T Toyo Open Country A/T III 265/60R18 110H Choose passenger or LT construction to suit actual load
Higher-load LT A/T Yokohama GEOLANDAR A/T4 G018 265/60R18 119/116S Check ride, pressure, load and speed trade-offs

These are catalogue candidates, not stock or universal-fitment claims. A 225/70R17C work ute needs a separately matched commercial/load-rated tyre; do not substitute a wider SR/SR5 recommendation.

Checks before fitting HiLux tyres

  • Confirm generation, grade, cab, body, 4x2/4x4 and production date.
  • Match complete tyre size, load index, speed rating and passenger/LT/commercial construction.
  • Account for tools, tray/canopy, accessories, payload, axle loads, towing and tow-ball download.
  • For 4WD vehicles, keep rolling circumference and wear appropriately matched and check the spare.
  • For modified wheels, verify PCD/hub conversion, centre bore, width, offset, wheel load rating and clearance from documentation.
  • Balance and complete four-wheel alignment after fitment where required.

HiLux tyre help in Adelaide

Autosport Tyre World can inspect the placard and wheel package at Magill, Clarence Gardens or Wingfield. Request a HiLux fitment check or call Magill on 0452 641 023.

Frequently asked questions

What tyre size does an Australian HiLux use?

It depends on generation, cab, body, grade and drivetrain. Important previous-generation references include 225/70R17C, 265/65R17 and 265/60R18; the new generation must be checked against its own placard.

Is 265/65R18 a factory size for every SR5?

No. It appears here as a documented workshop case with incomplete year/original-spec evidence, not as a universal factory claim.

Is the staggered Michelin PS4S package suitable for a normal 4WD HiLux?

No general claim is made. It is a one-off documented custom performance build requiring full vehicle-specific engineering and legal checks.