Toyota Kluger Tyre Size Guide Australia: 2003 to Current

Direct answer

Common Toyota Kluger tyre sizes in Australia include 225/70R16, 225/65R17, 245/65R17, 245/60R18, 245/55R19, 235/65R18 and 235/55R20, depending on year, generation, grade and wheel package.

For many 2014-2020 Toyota Kluger XU50 models, common sizes are 245/60R18 and 245/55R19. For 2021-current Toyota Kluger XU70 models, common sizes are 235/65R18 and 235/55R20. Always confirm the tyre placard and current tyre sidewall before ordering.

Toyota Kluger tyre size by generation

This table is a practical Australian workshop guide, not a substitute for the vehicle placard. Toyota Kluger tyre size can vary by model grade, year, hybrid or petrol drivetrain, factory wheel package, market specification and previous wheel changes.

Current Toyota Kluger XU70 tyre sizes

For 2021-current Toyota Kluger XU70 models, the two common sizes Adelaide drivers ask about are:

• 235/65R18 for many 18-inch wheel packages
• 235/55R20 for many 20-inch wheel packages

Some Kluger Hybrid, GX, GXL and Grande variants may use different wheels depending on specification. Before buying tyres, check the placard inside the driver door opening and compare it with the tyre sidewall currently fitted to the car.

Toyota Kluger XU50 tyre sizes

For 2014-2020 Toyota Kluger XU50 models, common tyre sizes include:

• 245/60R18
• 245/55R19

These sizes are common on Australian family SUV fitments, but the correct choice still depends on the exact wheel package and load rating.

Toyota Kluger XU40 and older Kluger tyre sizes

For 2007-2013 Toyota Kluger XU40 models, common sizes include 245/65R17 and 245/55R19. Earlier 2003-2007 Kluger models may use sizes such as 225/70R16 or 225/65R17, depending on variant.

Older Kluger vehicles are more likely to have had wheel changes during their life, so the current tyre sidewall and placard should both be checked before ordering.

How to confirm the correct Kluger tyre size

Before buying Toyota Kluger tyres, check:

• the tyre placard on the vehicle
• the tyre size printed on the current sidewall
• the wheel diameter currently fitted to the car
• the load index and speed rating
• whether the vehicle is petrol, hybrid, GX, GXL, Grande or a modified setup

If the placard and the current tyre sidewall do not match, the car may have aftermarket wheels or a previous size change. In that situation, rim width, offset, guard clearance, overall diameter and legal fitment should be checked before fitting tyres.

Popular Toyota Kluger tyre size searches

Use these links after confirming the correct tyre size on the car:

• 225/70R16 Toyota Kluger tyre options
• 225/65R17 Toyota Kluger tyre options
• 245/65R17 Toyota Kluger tyre options
• 245/60R18 Toyota Kluger tyre options
• 245/55R19 Toyota Kluger tyre options
• 235/65R18 Toyota Kluger tyre options
• 235/55R20 Toyota Kluger tyre options

You can also browse the full Autosport Tyre World tyre range.

Choosing tyres for Adelaide Kluger driving

The Toyota Kluger is a large family SUV, so most Adelaide drivers want tyres that balance:

• quiet road manners for daily family use
• wet braking confidence in winter
• stable highway feel on school runs, freeway trips and regional travel
• strong load support for passengers, luggage and occasional towing
• even wear across the full tread width

Tyre brands such as Bridgestone, Continental, Michelin, Dunlop, Pirelli, Hankook, Yokohama, Toyo and Falken can all suit different Kluger drivers, depending on size availability, budget and driving style.

Wheel alignment for Toyota Kluger tyres

For a heavier SUV like the Toyota Kluger, wheel alignment matters because uneven wear can shorten the life of a new set of tyres. A Kluger should be checked for wheel alignment if:

• the old tyres show inside-edge or outside-edge wear
• the steering wheel is off-centre
• the vehicle pulls to one side
• new tyres are being fitted
• wheels or tyre sizes have been changed
• the car has hit kerbs or rough road edges

Alignment is especially important on 19-inch and 20-inch Kluger wheel packages because tyre replacement cost is higher and uneven wear can become expensive quickly.

Local help for Toyota Kluger tyres in Adelaide

For help confirming Toyota Kluger tyre size, load rating, tyre availability and wheel alignment, contact Autosport Tyre World or visit one of our Adelaide locations.

TYREPLUS Magill | Autosport Tyre World Magill

647 Magill Road, Magill SA 5072
Phone: 0452 641 023

TYREPLUS Clarence Gardens | Autosport Tyre World Clarence Gardens

911 South Road, Clarence Gardens SA 5039
Phone: 0420 299 911

TYREPLUS Wingfield | Autosport Tyre World Wingfield

411 Grand Junction Road, Wingfield SA 5013
Phone: 0433 645 411

FAQ

What tyre size does a Toyota Kluger use?

Common Toyota Kluger tyre sizes include 225/70R16, 225/65R17, 245/65R17, 245/60R18, 245/55R19, 235/65R18 and 235/55R20, depending on year, generation and wheel package.

What tyre size is a 2021-current Toyota Kluger?

Common 2021-current Toyota Kluger XU70 tyre sizes include 235/65R18 and 235/55R20, depending on variant and factory wheel package.

What tyre size is a 2014-2020 Toyota Kluger?

Common 2014-2020 Toyota Kluger XU50 tyre sizes include 245/60R18 and 245/55R19, depending on grade and wheel package.

Are Kluger Hybrid tyre sizes different?

Kluger Hybrid tyre size can vary by grade and wheel package. Many current Kluger Hybrid models use the same style of 18-inch or 20-inch sizing as petrol variants, but the placard should always be checked before ordering.

Should I do wheel alignment after changing Toyota Kluger tyres?

Yes, wheel alignment is recommended if the old tyres show uneven wear, the steering is off-centre, the vehicle pulls to one side, or a new set of tyres is being fitted. Alignment helps protect tyre life on a heavier family SUV like the Toyota Kluger.