The Toyota Land Cruiser Prado 250 Series is the latest generation of Prado, built on Toyota’s TNGA-F platform shared with the Land Cruiser 300 Series. It delivers improved off-road capability, modern safety systems, and upgraded suspension geometry, making correct tyre and wheel fitment more critical than ever.
This guide covers all factory tyre sizes, rim specifications, centre bore, and torque settings based on Wheel-Size.com reference data and industry standards.
Factory Wheel Specifications
-
PCD (Bolt Pattern): 6×139.7
-
Centre Bore (CB): 95.1 mm
-
Thread Size: M14 × 1.5
-
Wheel Nut Type: Lug nuts
-
Offset (OE): +50 mm to +60 mm (varies by trim)
Wheel Torque Specification
-
Recommended Torque: 135–145 Nm
Autosport Tyre World recommendation:
Torque using a calibrated torque wrench and recheck after 50–100 km.
Factory Rim Sizes & Tyre Sizes
17-Inch Factory Setup (Base / Off-Road Focused Models)
-
Rim Size: 17×7.5
-
Tyre Size:
-
265/70R17
-
Best for:
-
Off-road performance
-
Higher sidewall durability
18-Inch Factory Setup (Mid Spec Models)
-
Rim Size: 18×8
-
Tyre Size:
-
265/65R18
-
Best for:
-
Daily driving
-
Touring setups
20-Inch Factory Setup (Higher Spec / Premium Models)
-
Rim Size: 20×8.5
-
Tyre Size:
-
265/60R20
-
Best for:
-
On-road comfort
-
Premium styling
Offset & Fitment Notes
-
Factory offset ranges between +50 to +60
-
Common aftermarket offsets:
-
+30 to +20 for moderate stance
-
+10 to 0 for aggressive setups
-
Important considerations:
-
Larger brake package may limit smaller wheel fitment
-
Lower offset increases track width and may require:
-
Guard trimming
-
Alignment adjustments
-
-
Always confirm brake clearance before downsizing
Recommended Upgrade Tyre Sizes (Australia Popular Setups)
Mild Upgrade (No Lift Required)
-
265/70R18
-
275/65R18
Touring / Off-Road Setup
-
285/65R18
-
285/70R17
Aggressive Setup (Lift Required)
-
295/70R18
-
305/65R18
Tyre Recommendations (Available at Autosport Tyre World)
Browse directly:
https://autostw.com.au/search?type=product&q=Prado+Tyres
Popular options:
-
Continental CrossContact AT
-
BFGoodrich KO2 / KO3
-
Nitto Terra Grappler G2
-
Falken Wildpeak AT3W / AT4W
Common Customer Questions (AEO Optimised)
What is the bolt pattern for Prado 250 Series?
6×139.7 PCD.
What is the centre bore?
95.1 mm.
What torque should wheel nuts be tightened to?
135–145 Nm.
Can I use Prado 150 wheels on Prado 250?
Not directly recommended. While PCD is the same, centre bore and offset differences must be checked.
What is the best tyre size upgrade?
285/65R18 is one of the most popular touring setups.
Why Choose Autosport Tyre World?
We specialise in the latest 4WD platforms including Prado 250 Series, offering expert advice and high-volume stock across South Australia.
Visit us:
Magill
647 Magill Road, Magill SA 5072
0452 641 023
Wingfield
411 Grand Junction Road, Wingfield SA 5013
0433 645 411
Clarence Gardens
911 South Road, Clarence Gardens SA 5039
0420 299 911