Toyota Fortuner Tyre Size Guide Australia

Toyota Fortuner AN160 2020-2026 Tyre Size Guide for Adelaide Drivers

Toyota Fortuner Tyre Size Guide Australia

Quick answer

For Australian Toyota Fortuner AN160 vehicles, 265/65R17 is the key GX/GXL reference and 265/60R18 is the key Crusade reference following the 2020 update. Toyota Australia confirmed 17-inch alloys for GX/GXL and 18-inch alloys for Crusade. Fortuner is no longer shown as a currently available new Toyota in Australia, so this page is for existing vehicles. Confirm the exact build date, grade and tyre placard before ordering.

Australian factory tyre guide

Grade Factory wheel Tyre-size reference Required check
GX 17-inch alloy 265/65R17 Confirm build date, load index and speed rating on placard
GXL 17-inch alloy 265/65R17 Confirm build date, load index and speed rating on placard
Crusade 18-inch alloy 265/60R18 Confirm build date, load index and speed rating on placard

Sources: Toyota Australia 2020 Fortuner press kit, Toyota Australia Fortuner model introduction and the Toyota Fortuner page. Earlier vehicles, option packages and imports may differ. HiLux and Prado sizes are not automatically interchangeable with Fortuner.

Modified Fortuner sizes

Status Published modified size Reason
No verified Autosport workshop case found None The audited Fortuner content consists of tyre-pattern guides rather than an evidence-complete wheel/tyre installation with width, offset and clearance details

A proposed larger setup requires wheel width, offset, load rating, brake and body clearance, suspension height, rolling diameter, speedometer, spare, alignment, insurance and South Australian legality checks.

Specific recommendations for placard-confirmed 265/65R17 vehicles

Use Pattern and complete catalogue size Fitment note
Premium road/touring Michelin LTX Trail 265/65R17 112T Road-focused comfort candidate
Balanced touring A/T Yokohama GEOLANDAR G015 265/65R17 112H Sealed-road and light gravel use
Mixed-use A/T Toyo Open Country A/T III 265/65R17 112H Touring and non-paved use
Higher-load LT A/T Yokohama GEOLANDAR A/T4 G018 265/65R17 120/117S Compare LT ride, pressure and load needs

Specific recommendations for placard-confirmed 265/60R18 vehicles

Use Pattern and complete catalogue size Fitment note
Premium all-terrain Continental TerrainContact A/T 265/60R18 110T Confirm placard rating and operating load
Road/touring A/T Yokohama GEOLANDAR G015 265/60R18 110H Balanced sealed-road and touring candidate
Mixed-use A/T Toyo Open Country A/T III 265/60R18 110H Confirm passenger or LT construction needs
Higher-load LT A/T Yokohama GEOLANDAR A/T4 G018 265/60R18 119/116S Compare ride, pressure, load and speed trade-offs

These are catalogue candidates, not current-stock or universal-fitment claims. A 17-inch GX/GXL recommendation is not a substitute for an 18-inch Crusade tyre.

Checks before fitting

  • Confirm GX, GXL or Crusade, build date and Australian-market identity.
  • Match full size, load index, speed rating and construction to the placard.
  • Account for passengers, luggage, accessories, towing and axle loads.
  • Keep all four tyres appropriately matched for the 4WD system and check the spare.
  • Inspect suspension, balance the tyres and complete alignment where required.

Fortuner tyre help in Adelaide

Autosport Tyre World can inspect the placard and wheel package at Magill, Clarence Gardens or Wingfield. Request a Fortuner tyre check or call Magill on 0452 641 023.

Frequently asked questions

What tyre size does an Australian Fortuner use?

For the 2020-updated range, GX/GXL use the 265/65R17 reference and Crusade uses 265/60R18; confirm the individual placard.

Is Fortuner still sold new in Australia?

It is no longer shown as currently available through Toyota's Australian new-vehicle network, but tyre and service support remains relevant to existing vehicles.

Can a HiLux or Prado tyre size be copied to Fortuner?

No. Shared components or similar dimensions do not replace the Fortuner's own grade, wheel and placard checks.